Find Smart Switchable Film, High Transparency Laminated Smart Film, Ultra Transparency Smart Film on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > High Temperature Silicone Tape > Hot Switchable Smart Film

Hot Switchable Smart Film

  • Hot Switchable Smart Film
  • Hot Switchable Smart Film
  • Hot Switchable Smart Film
  • Hot Switchable Smart Film

Hot Switchable Smart Film

    Packaging: Tube+Foam+Carton; Wooden Case is also Available
    Transportation: Ocean,Land,Air,Express
    Place of Origin: Shenzhen China
    Supply Ability: Ten Thousand Square Meters Per Month
    Certificate: CE, RoHS, FCC &SGS
    HS Code: 9013809000
    Port: Shenzhen

Basic Info

Model No.: High Transparency Self Adhesive Smart Film

Product Description

Product Description

Hot Switchable Smart Film

Our newest generation smart film is 88%~89% light transmittance. Roll width is 1000mm, 1200, 1500mm and 1800mm available. And one roll is 50m long. We also have High Transparency Laminated Smart Film. Light transmittance is about 84%. All widths are available too.


Smart Film Glass for Conference Room Installation Tips:

1. Check each piece after your receive and open the carton.

2. Test each piece before you install.

3. Use clean water or alcohol to clean the glass before installation. Never use anything acidity nor alkalinity.

4. The glass must be clean, dry and flat before sticking the smart film.

5. All bubbles should be scraped out.

6. Pls kindly not tear off the tape on the busbar. It can protect the busbar.

7. After installation, the smart film edge should be sealed with neutral glass silicone, never acidity nor alkalinity.



Abstract: A method for manufacturing a light-adjusting thin film electrode is provided with a light-adjusting liquid crystal layer. The light-adjusting liquid crystal layer is provided with conductive films on two sides of the liquid crystal layer, and pressure sensitive films are respectively provided on the outer sides of the two conductive films relative to the liquid crystal layer. The manufacturing process of the adhesive includes: cutting the Electrochromic Smart Film, Smart Switchable Filmfrom the upper and lower surfaces on two sides respectively, removing a single layer of pressure-sensitive adhesive, a conductive film and a liquid crystal layer in sequence from the outside to the inside to form a connecting groove, and the connecting groove is on the inner side The surface of the conductive film is coated with conductive glue, and then a mesh conductor is installed, and the exposed part of the mesh conductor extends to the outside of the Switchable Window Film. The conductive glue is cured by heating in a heating furnace, and the mesh conductor is welded on the surface of the exposed part. The solder joints are formed to connect the conductive lines, so that the solder of the solder joints sinks into the grid structure of the mesh conductors, so that the conductive glue can firmly and effectively combine the conductive film and the mesh conductors, and it can also make the soldering easier. The high temperature will not be conducted to the liquid crystal layer and the conductive film to avoid damaging the functions of the liquid crystal layer and the conductive film, and can effectively allow the voltage and current to be uniformly conducted to the conductive film through the mesh conductor, so as to improve the reaction and performance of the Pdlc Smart Film Switchable and Switchable Film For Home. purpose of efficiency.


Some main features of Ultra Transparency Smart Film:


1. Privacy Window Film Dimming: The intelligent electronically controlled privacy window film; dimming pdlc film has the ability to quickly and freely adjust the transmittance of visible light and infrared light. It only takes about 1‰ second from opaque state to transparent state, and only 1% second from transparent to opaque state, and its transparency can be changed in an instant.


2. Safety: Due to the production process of Pdlc Film For Office Partition, the safety of intelligent Electrochromic Glass smart adhesive film is improved. The Smart House Filmin the smart electronically controlled eletrical Pdlc film firmly sticks the Smart Glass Shower Door, so that when the Smart Film Glass Pdlc is impacted and broken, the glass fragments stick to the Smart Glass Window Film in the middle, and the fragments will not splash and hurt people.


3. Environmental protection and energy saving: With the continuous improvement of the quality of life, the concept of healthy and environmentally friendly life has become more popular, and the intelligent Window Smart Film, adopts a more humanized design in technology. According to professional reports, a considerable part of the indoor temperature is generated by direct sunlight entering the room from outside the window. After using the glass, it has heat insulation and heat preservation performance, which can greatly save energy. At the same time, it can also shield more than 90% of infrared rays and ultraviolet rays, reducing infrared heat radiation and transmission, which not only achieves environmental protection and energy conservation, but also makes us feel at ease. enjoys the bright sunshine.Privacy glass film pdlc; low cost Pdlc film; smart film for glass; Pdlc self adhesive smart tint are all environmental protection and energy saving.


4. Sound insulation: The Smart Film Cost and film in the middle of the dimming glass have a damping effect on the sound, which can effectively block all kinds of noise.



Yuguang Smart Film


Product Parameters

Pdlc Smart Film Data


Application


3

Switchable Film Glass

Smart Film

Factory

4.5m Full Auotmatic Cutting Machine

Automatic 4.5m Cutting Machine


Smart Film Pieces

Smart Glass Film

smart film pieces

smart film busbar


Work Table

Smart Glass Film 17

Making Busbar



Make Busbar

smart film making busbar


Goods Shipping

5c414a0c5a13d22b71ce587a1090164

Smart Film Packing






Shenzhen YuGuang New Material Co.,Ltd

  • 1
  • 2
  • 3
  • 4
 Shenzhen Yuguang New Material Co., Ltd. is a comprehensive and professional service provider of intelligent light control solutions. The company was founded in 2017. Our team set foot in the field of light control as early as 2008, and has accumulated more than ten years experience in the field of Smart Self Adhesive Film,Switchable Lamination Film,Intelligent Switchable Glass and Transparent LED Glass. Yuguang headquarter is located in Shenzhen, China, with a production base of 10,000 square meters. Its branch has an 8,000-square-meter production base in Jiangsu, China, and a glass processing plant in Huizhou, China. At present, there are more than 500 employees worldwide, including 15 R&D technicians and 50 after-sales service and project technical guidance. The current annual output of Yuguang smart film is up to 500,000 square meters, with a two-year growth rate of 60%.

Company Info

  • Company Name: Shenzhen YuGuang New Material Co.,Ltd
  • Representative: LongShan Zhu
  • Product/Service: Smart Film , Smart Glass , Transparent LED Display , PDLC Switchable Film , Intelligent Glass , Transparent LED Glass
  • Capital (Million US $): US$5 Million
  • Year Established: 2017
  • Total Annual Sales Volume (Million US $): Above US$100 Million
  • Export Percentage: 31% - 40%
  • Total Annual Purchase Volume (Million US $): Above US$100 Million
  • No. of Production Lines: 3
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 5,000-10,000 square meters
  • Factory Location: 2/F, Building 3, Huaqiang Industrial Logistics Park, No. 43 Qingfeng Avenue, Longgang District, Shenzhen City,Guangdong Province,China, Shenzhen, Guangdong, China
  • Contact Person: Ms. Kate Wang
  • Tel: 86-755-25805346
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters